产品
下载
联系我们
网站地图
返回首页

微信扫一扫
在线技术支持

微信扫一扫
访问视频号

Otasuke FAQ's Book
 
 FAQs
支持Windows® 7 new
 
Windows® 7-supporting operation of GP-PRO/PBIII for Windows
How to use a serial transfer cable (GPW-CB02) in the Windows XP mode of Windows® 7
How to use a USB serial conversion cable or a USB transfer cable in the Windows XP mode of Windows® 7
How to install the driver of a USB transfer cable (GPW-CB03) in the ordinary mode of Windows® 7
How to access the data saved in the ordinary mode drive from the Windows XP mode of Windows® 7
How to connect to a graphic operator interface via an Ethernet port in the Windows XP mode of Windows® 7
   
新用户快速入门
 
Quick start for new customers
Procedure of GP and PLC connection
   
支持的画面和逻辑编程软件

  1) GP*10 - GP*50 Series
  2) GP*70 Series
  3) GP*77R/77 Series
  4) GP2000/ST/Factory Gateway Series
  5) GLC/LT Series
Extension
 
无法通讯时的处理方法
 
  GP → PLC
 

When an error is displayed
When no error is displayed

  GP → 其他设备(非PLC)
 

When an error is displayed
When no error is displayed

How to connect the 2-port adapter
   
画面创建
 
  报警功能
  [如何创建报警画面]
  How to create the alarm screen (PDF)
  How many Alarm Messages can be registered in GP-PRO/PBIII?
   
  [历史/日志报警消息]
  Will the Alarm History be saved when turning OFF the power?
  How many Alarm History messages can be registered in the GP unit?
  Some alarm messages can't be saved in the GP.
   
  [报警消息故障排除]
  Alarm message is not displayed on Q-tag
  I have edited and deleted the Alarm Message, however, it is not reflected on GP unit.
  The items displayed on Q-tag of GP/PR-PB3 C-Package, such as [Month/Day/Year], [Trigger] and [Message], do not appear on Q-tag.
  When Q-tag selection key is touched, nothing happens.
     
  [报警消息打印]
  Is it possible to print out the Alarm data of Q-tag?
  I cannot print out the Q-tag's Alarm data
  Print out the alarm data of right to left scrolling display
     
  画面切换
  How can the GP's screens be changed from the PLC?
  Using Screen Change switch and Screen Change from a PLC together.
  I can't change the screens.
     
  键盘输入显示/弹出式键盘
  [键盘输入显示]
  How to create the data input screen (PDF)
  I can't input numbers with the Numeric Keypad.
  How to set the input range
  Is it possible to call up a Keypad Input Display by the Window?
     
  [弹出式键盘/键盘部件]
  Pop-up Keypad is not displayed
  Which versions of Screen Creation Software support the Pop-up Keypad function?
 

How to detect the value is inputted by Keyboard.

     
  指示灯/L Tag
  [L Tag]
  The Lamps which have been created on L Tag (Direct) don't change.
  The Lamps which have been created on L Tag (Indirect) don't change.
  The Lamps which have been created on L Tag (State) don't change.
  Is it possible to call up the screen that Tags or Parts are placed by L-tag?
     
  [指示灯(部件)]
  Lamps are not displayed
  Is it possible to display multi status by one Lamp?
     
  [指示灯/L Tag故障排除]
  The drawings which have been called on L Tag do not disappear
  When displaying the L-tag or Lamp Parts, they are not displayed in the selected color.
  When switching the display of multiple images by using L-tag, the new image is drawn on top of the previous images, and images are overlapped.
     
  文本/消息显示器
  [消息显示器]
  Windows are not displayed.
  The window is displayed, however, K-tag or Keypad Input Display placed on the window is not displayed.
  How many windows can be displayed?
  Display the designated window on the selected place.
  Change the display area size of the Window Screen
     
  采集功能
  What's the approximate maximum size for Logging settings of screen-creating software?
   
GP-PRO/PB3 C-Package的操作
 
  模拟
  [No simulation infomation] displays in Simulation Feature.
     
  打印
  Printing a screen from a GP unit
  Print out the data created by GP-PRO/PB3 C-Package such as Screen, D-script and Alarm from the PC.
  Cannot print out the data created by GP-PRO/PB3 C-Package such as Screen, D-script and Alarm from the PC
  Changing a print direction with hardcopy of a screen
     
  创建文档
  How can I output the informations which I have created with GP-PRO/PB III C-Package to Microsoft(R) Word File?
     
  设置GP
  How can I change the GP type?
  For using the screen data of GP with large display size by small GP.
  Replacing color screen data with monochrome GP.
     
  LS区/系统区
  What's System Data Area?
  How to backup the data of LS area even if it turns off the power?
   
画面传输
 
  传输电缆
  Can GPW-CB-SET(GP430-CU02-M) be used for current GP units?
  What kind of transferring cables are there?
 
How to use a serial transfer cable (GPW-CB02) in the Windows XP mode of Windows® 7 new
 
How to use a USB serial conversion cable or a USB transfer cable in the Windows XP mode of Windows® 7 new
 
How to install the driver of a USB transfer cable (GPW-CB03) in the ordinary mode of Windows® 7 new
     
  以太网传输
 
How to connect to a graphic operator interface via an Ethernet port in the Windows XP mode of Windows® 7 new
 
How to manually specify "IP Address" of a graphic operator interface and transfer data via Ethernet new
     
  无法传输画面
  Solutions for each transfer error message
  When no error is displayed
  When "Windows Security Alert" is displayed.
 
Windows® 7-supporting operation of GP-PRO/PBIII for Windows new
     
  传输密码
  Password at the time of transfer
  If you forget your password
     
  查看文件大小
  To confirm volume of the screen data to be transferred to GP
     
   
故障排除
 
打开/关闭基本画面
I can't open the project file.
The dialog says [System files is corrupt] or [Unable to read current project information].
The dialog says [Invalid Screen] when save the screen.
   
输入地址
An address can't be entered.
The message dialog says [Invalid address] when address registration. What does this mean?
   
创建画面
The dialog box says [Exceeds Part Library limt ].
   
GP故障
A drawing which I didn't draw on the screen is displayed.
When parts are overlapping, they don't display correctly.
Display of Switces and Lamps are not shown after transferring the Screen to GP
The buzzer keeps sounding.
The touch doesn't work.
The GP's screen becomes dark.
The GP's display is dark.
After powerup, the GP screen is displayed for a moment, then goes black.
   
错误消息
Communicate with PLC
Communicating Devicies except PLC
   
Error starting with [0**:]
When C:**** or D:**** appears
Corrupted Screen Data (nnnn:mmmm)
Clock Set up Error
OBJ.PLC has not been setup(**)
   
GP主机/硬件
 
初始画面/离线模式
How to enter [Offline] mode
How can I confirm PLC type (Connetion Device type) on GP?
How to adjust Brightness and Contrast
   
其他
The minimum size of a touch switch.
If I reset GP, what will happen to data inside of GP?
Graphic Panel LCD Displays
Display Panel Protection
GP Display during start-up
Barcode
Can commercial CF card be used?
   
返回顶端 返回上一页
常见问题 | 个人信息保护 | 关于知识产权 | 使用条款
版权 (C) 2005- Schneider Electric Japan Holdings Ltd.,和普洛菲斯国际贸易(上海)有限公司版权所有,保留所有权利。
沪ICP备05028659号-3