32.1 Logic Instruction List
32.2 About Addresses You can Set up as Operands
32.3 Number of Steps Per Instruction
32.4 Bit Instructions
32.5 Pulse Instructions
32.6 Program Control
32.7 Timer Instructions
32.8 Counter Instructions
32.9 R/W Instructions
32.10 Operation Instructions (Arithmetic)
32.11 Operation Instructions (Time)
32.12 Operation Instructions (Logical)
32.13 Operation Instructions (Transfer)
32.14 Operation Instructions (Shift)
32.15 Operation Instructions (Rotation)
32.16 Function Instructions (Calculate Function)
32.17 Function Instructions (Trigonometric Function)
    32.17.1 SIN and SINP (Sine)
    32.17.2 COS/COSP (Cosine)
    32.17.3 TAN and TANP (Tangent)
    32.17.4 ASIN and ASINP (Arc Sine)
    32.17.5 ACOS/ACOSP (Arc Cosine)
    32.17.6 ATAN and ATANP (Arc Tangent)
    32.17.7 COT and COTP (Cotangent)
    32.17.8 EXP and EXPP (Exponential)
       32.17.8.1 Calculating the Number of Steps When Setting Operands - EXP/EXPP
       32.17.8.2 Operand Settings (S1/D1) - EXP/EXPP
       32.17.8.3 Explanation of the EXP and EXPP Instructions
       32.17.8.4 System Variables Indicating Execution Results - EXP/EXPP
    32.17.9 LN and LNP (Logarithm)
    32.17.10 LG10 and LG10P (Log Base 10)
32.18 Compare Instructions (Arithmetic)
32.19 Compare Instructions (Time)
32.20 Compare Instructions (Date)
32.21 Convert Instructions (Data Convert)
32.22 Convert Instructions (Type Convert)
32.23 I/O Driver Instructions
32.24 Restrictions for I/O Driver Instructions (STD Driver)