Software Update Module / Add-on Software
|
使用我们的下载服务之前，请阅读以下使用条款。下载任何软件都表明您已同意这些条款。
使用条款
- Pro-face对此下载服务所提供的所有文件拥有知识产权。
- 您仅能以非赢利性目的、在您所属公司内部下载这些文件供个人使用。
- 严禁复制、公布、再出版、转让、出借、反编译、修改、伪造或再利用Pro-face为此下载服务提供的任何文件。
- 此下载服务通过互联网提供。在使用该项服务前，请明确Pro-face对下载时的状况、可访问性和与此项服务相关的使用情况不做任何担保。
- 使用此项服务的风险由您个人承担。
- 如果下载文件上有任何附加条款，如服务使用条款等，请务必遵守此类条款。
注意：
- 下载方法1：鼠标右键点击下载链接，选择“目标另存为...”。请不要使用下载软件进行下载。
- 下载方法2：部分文件通过百度云盘下载(需登录百度云盘)，请按下载链接上红色字体的指示操作。
- 删除文件或对文件内容、规格等做出修改时恕不另行通知。
- 下载文件后，请确认其大小与显示的下载文件大小完全相符。
- 如果不相符，请勿解压(执行)此文件，而应将其删除，然后再重新下载一次。
|
Note:
This program should be run on a PC in which Pro-Server with Pro-Studio Ver. 4.12 has been installed.
If your Pro-Server with Pro-Studio is earlier than Ver. 4.12, please update it with the following module.
-
Note in Setting the Program:
When you install Pro-Server with Pro-Studio with the setup type "Custom", please be aware of the following.
-
- If the action functions are added from the master CD after Pro-Server with Pro-Studio is updated to Ver. 4.13 with this module, the action functions are not updated to Ver. 4.13. In this case, please reinstall Pro-Server with Pro-Studio with your desired action functions.
| File
Name |
Pro-ServerV413.exe |
| File
Size |
1,175KB |
| Applicable
Version |
Pro-Server
with Pro-Studio Ver. 4.12 |
| Description |
Module for updating
Pro-Server with Pro-Studio to Ver.
4.13 |
| Features |
| 1.
The following function is improved. |
| - |
Read/Write-cache
performance of PLC devices has
been improved. |
2. The following issues were resolved. |
| - |
In "Import
C-Package Symbol", when
a project in which many symbols
has been registered is specified,
it may be impossible Pro-Server
imports all the symbols. |
| - |
In "Writes
Data to E-Mail" action,
text received by some cell phones
may transformed. |
| - |
Access to a certain
address range of "Toshiba
PROSEC-T Series", "Toshiba
PROSEC-T(Ether)", and "KEYENCE
KZ-10_80RW/TW Series" causes
an error. |
| Protocol
Name |
Device
Name |
Address
Range |
Toshiba
PROSEC-T Series
Toshiba PROSEC-T(Ether) |
Z |
02560-4095F |
| KEYENCE
KZ-10_80RW/TW Series |
(Input-Output
Relay) |
00500-00915 |
| (Internal
Auxiliary Relay) |
01000-01915
03000-06915 |
| (Special
Auxiliary Relay) |
02000-02915 |
|
|
| - |
In "Create
report using Excel" action,
when "Newest Data (CF Card
internal data)" is specified
as "File No" setting
in some Data ID, continuation
of executing the action may cause
an error of "Unable to create
or read temporary file". |
| - |
When GP Time and
Device Value are executed at
the same time from multiple "Create
report using Excel" actions,
Pro-Server does not worked.
* Be
sure to restart Pro-Server
when the above error occurs.
Apart from this matter, your
PC and any data on the hard
disk are not affected by the
above error. |
|
Module Installation (This is a self-extracting file)
- Confirm that Pro-Server with Pro-Studio Ver. 4.12 is installed in your PC.
- Since this software update module only overwrites the modified sections of the program (a portion of the program), do not uninstall Pro-Server with Pro-Studio from your PC.
- Be sure to quit Pro-Server with Pro-Studio before installing this module.
Installation Procedure
- Click on the link "Pro-ServerV413.exe" in the box above to download the file to the desired folder.
- After the download is completed, double-click on the "Pro-ServerV413.exe" file to start installation.
- Follow the installer program's directions.
- When installation is completed normally, " Setup completed." is displayed.
If there are any problems and installation can not be completed, contact our company.
Last Updated : January.22, 2002
|
