Confirm your software version using the
following steps:
[Pro Frame] --> [Help] --> [About...]
|
| File
Name |
Pro-ServerV412.exe |
| File
Size |
2,509KB |
| Applicable
Version |
Pro-Server
with Pro-Studio Ver. 4.1 |
| Description |
Module for updating
Pro-Server to Ver. 4.12 |
| Features |
| 1. |
"Automatic
Upload/Download of GP Filing
Data" Action feature now
supports CSV files. |
| 2. |
It is now possible
to show/hide the System Time
Bar displayed in Data View (Device
View/GP-Viewer) |
| 3. |
GLC System Variable
Symbols can now be set as either
Show or Hide. |
| 4. |
Add the on/off(1/0)
button in the Device Monitor
Write dialog box. |
| 5. |
Add the "Address
Hold" feature. Using this
feature, the Device Address Write
dialog box does not move to the
next Device Address when a value
is entered in Device Monitor
Write dialog box and the enter
button is pressed. |
| 6. |
VB.NET samples
are now available. |
|
|
|
Module Installation (This
is a self-extracting file)
Confirm that Pro-Server with Pro-Studio
for Windows Ver. 4.1 is installed in your PC.
Since this software update module only overwrites the modified
sections of the program (a portion of the program), do not
uninstall Pro-Server with Pro-Studio for Windows Ver. 4.1.
from your PC.
Be sure to quit Pro-Server before installing this module.
Installation Procedure |
| 1. |
Click on the link "Pro-ServerV412.exe" in
the box above to download the file to the desired folder. |
| 2. |
After the download is completed, double-click
on the "Pro-ServerV412.exe" file to start installation. |
3.
|
Follow the installer program's directions. |
| 4. |
When installation completes successfully, the dialog
box "It succeeded in the making a setup" appears. |
| 5. |
Start up Pro-Server.exe.
Right-click on the Task Tray's [VERSION INFO (Pro-Server)] icon. Check that the
version number displayed in the dialog box is Ver. 4.12.
* The version number displayed in the Windows [Control Panel | Application Add/Delete]
dialog box remains unchanged. |
|
| Important: |
| 1) |
When a Project file has been edited as in the following
example, symbols can NOT be used on the GP unit's screen after Pro-Studio's
[C-Package Symbol Import] has been performed: |
| |
| - |
After all GP-PRO/PBIII C-Package
special protocol symbols have been deleted,
the same symbols are again added to the project
and the project file saved without changing/updating
the screen used. |
|
| |
Solution: After changing a screen's
symbol data, be sure to make a change in the actual screen data before
saving. This will allow the Import feature to be used.
|
| 2) |
When the network project Provider information's size
is from 59500 to 61440 bytes:
Sending Provider information to the GP unit results in a "size overflow" error,
even though no error occurs when the Provider data is checked.
Solution: The file size at transfer time
is the true maximum file size. Therefore, tune the Provider
information until this error stops.
|
| 3) |
| - |
"Write Data to Excel
book" action. |
| - |
"Upload of GP Log Data" action
(for template file selection) |
| - |
"Automatic Upload of
GP Filing Data" action (for save destination
selection) |
| - |
"Automatic Download of
GP Filing Data" action (for download
file selection) |
|
| |
If the media used in the drive you have selected using
any of the above feature's drive selection combo boxes does not exist
(Ex. selecting a floppy disk drive where no floppy disk is inserted)
This will, in turn, display a dialog box, and the desired Action cannot
be registered. Also, the data setup dialog box will not be displayed.
Solution: Restart Pro-Server. |
沪ICP备05028659号-3