产品
下载
联系我们
网站地图
返回首页

微信扫一扫
在线技术支持

微信扫一扫
访问视频号

 FAQ(常见问题)
 错误代码


点击各代码,将显示详情页面。


*查看完整代码列表,请点击这里

错误代码 消息

RHAA006 (驱动程序名称):(端口名称) Received data has been parity error

RHAA007

(节点名称):(端口名称) Received data has been framing error

RHAA008 (驱动程序名称): This machine does not have any Ethernet interface
RHAA009 (驱动程序名称):(端口名称) Cannot use the port
RHAA010 (驱动程序名称): TCP port number (%d) is overlapped, or it is not completed to close the last TCP connection
RHAA011

(驱动程序名称): Connection was closed

RHAA012

(驱动程序名称): UDP Port number is overlapped

RHAA013

(驱动程序名称): COM1: The 9th pin has not been set to VCC (5V Power Supply). Please check your cable or connected equipment.

RHAA033 (节点名称): Error has been responded for initial communication command (Error Code: (十进制)[(十六进制)])

RHAA034

(节点名称): Error has been responded for device read command (Error Code: (十进制)[(十六进制)])

RHAA035 (节点名称): Error has been responded for device write command (Error Code: (十进制)[(十六进制)])
RHAA036 (节点名称): Error has been responded for device read command (Error Code: (十进制)[(十六进制)] There are out of range devises)

RHAA037

(节点名称): Error has been responded for device write command (Error Code: (十进制)[(十六进制)] There are out of range devises)

RHAA038

(节点名称): Error has been responded for device read command (Error Code: (十进制)[(十六进制)] There are write only devises)

RHAA039

(节点名称): Error has been responded for device write command (Error Code: (十进制)[(十六进制)] There are read only devices)

RHAA040 (节点名称): Illegal response for initial communication command

RHAA041

(节点名称): Illegal response for device read command

RHAA042 (节点名称): Illegal response for device write command
RHAA043 (节点名称): Checksum error response for initial communication command
RHAA044 (节点名称): Checksum error response for device read command
RHAA045 (节点名称): Checksum error response for device write command
RHAA049 (节点名称): Unknown devices exist in read devices

RHAA050

(节点名称): Unknown devices exist in write devices

RHAA051 (节点名称): Out of range devices exist in read devices (Address: (寄存器地址))

RHAA052

(节点名称): Out of range devices exist in write devices (Address: (寄存器地址))

RHAA053 (节点名称): You cannot read the write only device (Address: (寄存器地址))

RHAA054

(节点名称): You cannot write the read only device (Address: (寄存器地址))

RHAA065 (节点名称): TCP connection open error (IP Address: (IP地址))

RHAA066

(节点名称): UDP target not found (IP Address: (IP地址))

RHAA067 (节点名称): Response timed out for initial communication command

RHAA068

(节点名称): Response timed out for device read command

RHAA069 (节点名称): Response timed out for device write command
RHAA070 (节点名称): The cable has been disconnected or the target has been powered off
RHAA071 (节点名称): The extend unit (Unit Name) is not implemented
RHAA072 (节点名称): Since a buffer was insufficient, the read request was unreceivable
RHAA073 (节点名称): Since a buffer was insufficient, the write request was unreceivable
RHAA084 (节点名称): Too many requests to write. The request was ignored.
RHAA085 (节点名称): Too many requests to read. The request was ignored.
返回页面顶端 --> 返回上一页
常见问题 | 个人信息保护 | 关于知识产权 | 使用条款
版权 (C) 2005- Schneider Electric Japan Holdings Ltd.,和普洛菲斯国际贸易(上海)有限公司版权所有,保留所有权利。
沪ICP备05028659号-3