RS-422 communication can be performed by connecting PL-RC500 (option article) to COM.
Please refer to the following table.
Enabled device：PL-5900 series, PL-X920 series, PS-2000B
|
PL-5900 series |
PL-X920 series |
PS-2000B |
| COM |
COM2 |
COM2 |
COM1 |
| COM3 |
COM3 |
COM3 |
| SW position |
side of main unit（next to COM） |
on the Main board |
on the Main board |
| SW setting |
no SW name +5 |
SW3 ON |
SW2 +5 |
| no SW name +5 |
SW3 ON |
SW3 +5 |
|
However, it is necessary to operate the main function switch on the position of each SW for operation.（*1）
Please refer to each PL user's manual for details. [Interface Specification]-> [RS-232C Interface]
Download User Manual here
| * 1 |
5V power supply is needed to operate PL-RC500. COM output RI signal at the state of default and can be exchanged to 5V output by a dip switch setting. |
|
Return to Top
Close
沪ICP备05028659号-3