For host controllers and connection cables, refer to the corresponding device driver manual of your screen editing software.
|
Product name |
Product number |
Supported product |
Description |
|---|---|---|---|
|
Serial interface |
|||
|
9-pin-to-25-pin RS-232C Conversion Cable (0.2 m) |
CA3-CBLCBT232-01 |
Box Module |
Cable for converting a D-Sub 9-pin plug to a D-Sub 25-pin socket (RS-232C). |
|
RS-422 9/25-pin Conversion Cable (0.2 m) |
PFXZCBCBCVR41 |
Box Module |
Cable for converting a D-Sub 9-pin plug to a D-Sub 25-pin socket (RS-422). |
|
COM Port Conversion Adapter |
CA3-ADPCOM-01 |
Box Module |
Connects optional RS-422 communication items to serial interface. |
|
RS-422 Terminal Block Conversion Adapter |
PFXZCBADTM1 |
Box Module |
Connects output from a serial interface (D-sub 9 pin plug) directly to an RS-422 terminal block. |
|
RS-232C Isolation Unit |
CA3-ISO232-01 |
Box Module |
Connects a host controller to this product and provides isolation. (RS-232C and RS-422 are switchable). |
|
USB (Type A) interface |
|||
|
USB Transfer Cable (2 m)*1 *3 |
CA3-USBCB-01 |
Box Module |
Downloads project data via USB Interface. |
|
USB Cable (5 m)*3 |
FP-US00 |
Box Module |
Connects a USB printer (Type B). |
|
USB Front Cable (1 m) |
CA5-USBEXT-01 |
Box Module |
Extension cable that attaches USB interface to front panel. |
|
USB-Serial (RS-232C) Conversion Cable (0.5 m)*3 |
CA6-USB232-01 |
Box Module |
Cable for converting a USB interface into a serial interface (RS-232C). Allows connection to modems*2 or bar code readers*2 that support RS-232C. |
|
USB/RS-422/485 Conversion Adapter*3 |
PFXZCBCBCVUSR41 |
Box Module |
Adapter for connecting this product (USB Type A) to an external device (RS-422/RS-485). |
|
EZ Illuminated Switch*3 |
PFXZCCEUSG1 |
Box Module |
A unit of 5 illuminated switches with multiple color LED connected to this product via USB. |
|
EZ Fingerprint Recognition Unit*3 |
PFXZCCEUSS1 |
Box Module |
Fingerprint recognition unit connected to this product via USB. |
|
EZ Numpad*3 |
PFXZCCEUKB1 |
Box Module |
Numpad connected to this product via USB. |
|
EZ Tower Light tube mounting with fixing plate*3 |
PFXZCETWHA1 |
Box Module |
USB Connection Type Monolithic EZ Tower Light tube mounting with fixing plate 3 tiers, Ø60, lighting and flashing with a buzzer |
|
EZ Tower Light with base mounting*3 |
PFXZCETWW1 |
Box Module |
USB Connection Type Monolithic EZ Tower with base mounting 3 tiers, Ø60, lighting and flashing with a buzzer |
|
USB (mini-B) interface |
|||
|
USB Transfer Cable (USB Type A/mini-B) (1.8 m)*1 |
ZC9USCBMB1 |
Box Module |
Cable for transferring screen data from a PC (USB Type A) to this product (USB mini-B). |
|
USB Panel-mount Extension Cable (USB mini-B) (1 m) |
ZC9USEXMB1 |
Box Module |
Extension cable that attaches to the USB (mini-B) interface on the front side of the operation panel. |
|
USB Clamp mini-B (1 port) |
ZC9USCLMB1 |
Box Module |
Clamp to prevent disconnection of USB cable (USB/mini-B, 1 port, 5 clamps/set). |
|
Expansion unit interface |
|||
|
PROFIBUS DP Slave/MPI Unit*3 |
PFXZCDEUPF1 |
Box Module |
Expansion unit that enables participation of this product in the PROFIBUS network and communication with the PROFIBUS DP master or in the MPI network (communication speed: 12 Mbps). |
|
Flex Network Master Unit*3 |
PFXZCHEUFN1 |
Box Module |
Expansion unit that enables participation of this product in the Flex network. |
|
CANopen Master Unit*3 |
PFXZCHEUCAM1 |
Box Module |
Expansion unit that enables participation of this product in the CANopen network and communication with the CANopen slave. |
|
CANopen Slave Unit*3 |
PFXZCDEUCA1 |
Box Module |
Expansion unit that enables participation of this product in the CANopen network and communication with the CANopen master. |
|
J1939 Unit*3 |
PFXZCHEUJ1 |
Box Module |
Expansion unit that enables participation in the J1939 communication network. |
|
Auxiliary output/Speaker output interface |
|||
|
AUX Connector |
PFXZCDCNAUX1 |
Box Module |
AUX connector required in case an external output is used (5 pcs/set). |
|
Storage |
|||
|
SD Memory Card (4 GB) for Storage*4 *5 |
PFXZCBSD4GC41 |
Box Module |
SD Memory Card (4 GB, MLC) (Storage) |
|
Others |
|||
|
Battery for Memory Backup |
PFXZCBBT1 |
Box Module |
Primary battery for time data backup (1 piece) |
|
Box Module Fixing Bracket |
PFXZCHBMFBS1 |
7-inch Wide Display Module |
Bracket for fixing Box Module to Display Module (1 piece) |
|
PFXZCHBMFBL1 |
12-inch Wide Display Module/15-inch Wide Display Module |
||
|
DC Power Supply Connector with fixable screws |
CA7-ACCNL-01 |
Display Module (except 7-inch Wide Display Module) |
Connector to connect DC power supply cables (5 pcs/set) |
*1 You can connect using just one of the available USB (Type A/mini-B) interfaces.
*2 For supported models, refer our support site at http://www.pro-face.com/trans/en/manual/1001.html.
*3 Make sure your screen editing software supports the product.
*4 You can also use a commercial type.
*5 SD/SDHC card of up to 32 GB.
|
Product name |
Product number |
Supported product |
Description |
|---|---|---|---|
|
Installation Gasket |
PFXZCDWG72 |
7-inch Wide Display Module |
Provides dust and moisture resistance when this product is installed into a solid panel (1 piece) |
|
PFXZCDWG122 |
12-inch Wide Display Module |
||
|
PFXZCHWG154 |
15-inch Wide Display Module |
||
|
DC Power Supply Connector |
PFXZCBCNDC1 |
Display Module |
Connector to connect DC power supply cables |
|
DC Power Supply Connector with fixable screws (Angle type) |
PFXZCHCNDC3 |
Display Module (except 7-inch Wide Display Module) |
Connector with fixable screws to connect DC power supply cables (Angle type, 5 pcs/set) |
|
USB Clamp Type A (1 port) |
PFXZCBCLUSA1 |
Box Module |
Clamp to prevent disconnection of USB cable (USB Type A, 1 port, 5 clamps/set) |
|
SD Memory Card (1 GB) for System Card |
PFXZCDSD1GC61 |
Box Module |
SD memory card (1 GB, SLC) for System Card |
