The following IPC and PC/AT compatible machines support WinGP.
To check the specifications for each supported model, see the IPC series user manual.
WinGP will start only on the models listed below.
PS Series
WinGP supports the following operating systems.
|
Required Specifications |
Remarks |
---|---|---|
Operating system |
|
64-bit operating systems are not compatible. (excluding Windows 7) |
Models |
|
Resolutions supported by WinGP are as follows:
|
PL Series
WinGP supports the following operating systems.
|
Required Specifications |
Remarks |
---|---|---|
Operating System |
|
64-bit operating systems are not supported. |
Models |
|
Resolutions supported by WinGP are as follows:
|
PC/AT
WinGP Operating Environment Requirements
|
Required Specifications |
Remarks |
---|---|---|
CPU |
1GHz or faster |
|
Operating System |
Service Pack 3 or later
Home Edition, Professional (Service Pack 1 or later)
Ultimate, Home Premium, Home Basic, Business, Enterprise
All editions of 32-bit/64-bit versions |
64-bit operating systems are not compatible. (excluding Windows 7) |
Resolution |
SVGA 800×600 or higher |
SXGA is recommended. |
Memory |
512MB or more
More than 1 GB |
1 GB or more is recommended.
2 GB or more is recommended |
Hard Disk Space |
200MB or more |
This capacity is required to install Movie Converter. |
When WinGP operates in a non-Japanese operating system, the WinGP window menu bar, right-click menu, copy tool, and popup messages are all displayed in English. In offline mode, they are displayed in the system language selected from the [Main Unit Settings], [Display] tab's [System Language] property.
Supported drivers
The following drivers are not supported by WinGP.
Manufacturer |
Series |
CC-Link Partner Association |
CC-Link Intelligent Device |
KEYENCE Corporation |
QnA Series CPU Direct |
ODVA |
DeviceNet Slave |
PROFIBUS International |
PROFIBUS DP Slave |
Rockwell Automation, Inc. |
DH-485 |
Siemens AG |
SIMATIC S7 MPI Direct |
CAN in Automation |
CANopen Slave |