T.3.3 Different part of the display responds when touched (switch), or responds by itself - When Using WinGP

Run the self-diagnosis of the IPC series and PC/AT unit. Perform the analog touch panel correction (calibration).

For the setting procedure, see the following.

1. Install Mouse Emulation Software.

   

   • If Mouse Emulation Software is not readily available, you can download it from our website. For information regarding how to download and install, refer to the following web sites.http://www.pro-face.com/otasuke/

2. From the start menu, select [All Programs], [UPDD], and then [Calibrate].

3. When the Calibrate screen appears, touch, in turn, the arrow marks displayed on the screen.

4. When the [Check calibration] dialog box appears, click [OK]. This will complete the correction.