Error Code
Error Message
Cause and Troubleshooting
Browse
RFAF005
Select device name
The monitor was started without [Connection Device Name] selected in [Device View]. Select a connection device name in [Device View].
37.20.1.7 Standard Template HTML - Main Frame / [Device View] Page
RFAF006
Enter device address
The monitor was started without [Device Address] selected in [Device View].
Select [Device Address] in [Device View].
37.20.1.7 Standard Template HTML - Main Frame / [Device View] Page
RFAF007
Select access points
The monitor was started without [Access Points] selected in [Device View]. Select [Access Points] in [Device View].
37.20.1.7 Standard Template HTML - Main Frame / [Device View] Page
RFAF008
Select data type
The monitor was started without [Data Type] selected in [Device View]. Select [Data Type] in [Device View].
37.20.1.7 Standard Template HTML - Main Frame / [Device View] Page
RFAF009
Select update cycle
The monitor was started without [Update Cycle] selected in [Device View]. Select [Update Cycle] in [Device View].
37.20.1.7 Standard Template HTML - Main Frame / [Device View] Page
RFAF010
Insufficient memory
No Memory is set. Forcibly transfer the system using GP-Pro EX. If this error still occurs despite forcibly transferring the system, reduce the screen data capacity.*1
RFAF011
Invalid request
The cause of this error may be that the URL was edited and an invalid request was sent. Transfer the standard HTML template again using [Site Transmission] in [Transfer Tool]. Alternatively, you can run forced transfer of the system from GP-Pro EX.*2
RFAF024
Invalid URL
The cause of this error may be that the URL was edited and an invalid request was sent. Make sure that the folder specified in the Web folder of [Remote Monitoring Settings] in the System Settings exists in external storage. Alternatively, transfer again the standard HTML template using [Site Transmission] in [Transfer Tool], or run a forced transfer of the system from GP-Pro EX.*2
RFAF026
Cannot open URL
The cause of this error may be that the URL was edited and an invalid request was sent. Make sure the Web folder you specified from the [System Settings] node's [Remote Monitoring Settings] exists on external storage. Alternatively, transfer the standard HTML template again using the [Transfer Tool]'s [Site Transmission] setting, or run a forced transfer of the system from GP-Pro EX.*2
RFAF028
Cannot stat page for URL
The cause of this error may be that the URL was edited and an invalid request was sent. Make sure the Web folder you specified from the [System Settings] node's [Remote Monitoring Settings] exists on external storage. Alternatively, transfer the standard HTML template again using the [Transfer Tool]'s [Site Transmission] setting, or run a forced transfer of the system from GP-Pro EX.*2
RFAF030
Missing form name
The cause of this error may be that the path after /goform/ was specified incorrectly and accessed. Transfer the standard HTML template again using [Site Transmission] in [Transfer Tool] or run a forced transfer of the system from GP-Pro EX.*2
RFAF031
Form (*****) is not defined. Form Name: *****
The cause of this error may be that the path after /goform/ was specified incorrectly and accessed. Transfer the standard HTML template again using the [Transfer Tool]'s [Site Transmission] setting or run a forced transfer of the system from GP-Pro EX.*2
RFAF040
Access Denied. Wrong Password
The password may be incorrect. Enter the correct user ID and password. Also check if settings such as whether only the password is used or whether both the user ID and password are used is correct.*2
-
RFAF041
Access to this document requires a password
The cause of this error may be that the document was accessed via a new window and the password is incorrect. Enter the correct user ID and password. Also check if settings such as whether only the password is used or whether both the user ID and password are used are correct.*2
-
RFAF042
Access to this document requires a User ID
The cause of this error may be that the document was accessed via a new window and the user ID is incorrect. Enter the correct user ID and password. Also check if settings such as whether only the password is used or whether both the user ID and password are used are correct.*2
-
RFAF049
Cannot open template file
The standard HTML template is deleted. Make sure that the folder specified in the Web folder of [Remote Monitoring Settings] in the System Settings exists in external storage. Alternatively, transfer again the standard HTML template using [Site Transmission] in [Transfer Tool], or run a forced transfer of the system from GP-Pro EX.*1
37.20.2 System Settings - Display Unit - Remote Viewer Settings Guide
RFAF051
Failed to get device address
An incorrect [Device] is set. Set the correct [Device].
-
RFAF052
Failed to read device
An attempt was made to read the device that is not communicating with the connection device. Set the correct [Device]. Alternately, make sure that the Display and connection device are correctly connected.
-
RFAF053
Failed to write device
An attempt was made to write the device that is not communicating with the connection device. Set the correct [Device]. Alternately, make sure the Display and equipment are connected correctly.
-
RFAF054
Entered data is not consistent with Data Type.
Data was written that differs from the data type set in [Data Type]. Enter the correct data.
-
RFAF055
Entered data is too much.
Data beyond the limit was written to the set [Data Type]. Enter the correct amount of data.
37.10.3 Operation - Displaying and Editing Addresses Via Web Server
RFAF056
Enter data.
Blank data was entered. Enter the correct amount of data.
-
RFAF057
In the server settings [Write Web Server Data] is disabled. This operation will not run.
To enable writing, from the [Common Settings] select [Security], [Passwords], and [Set Security Level For Each Feature], then in the [Write Web Server Data] area clear the [Disable] check box.
RFAF064
Failed to read alarm information
The cause of this error may be that alarm information is not set and the alarm list is collected. Check alarm settings using GP-Pro EX.*1
RFAF065
Executing other request
SRAM is being accessed by the display unit. Wait for several minutes and try updating again.*1
-