Required Specifications
Remarks
Operating System
-
Windows 2000 (Service Pack 4 or later)
-
Windows XP
-
Windows Vista
-
Windows 7
Ultimate / Enterprise / Professional / Home Premium / Home Basic / Starter
No support for 64-bit versions of the Windows XP and Windows Vista operating systems.
Drawing software
GP-Pro EX Ver.1.10 or later
Runtime version Ver.1.10.00 or later
When using WinGP models
GP-Pro EX Ver.2.50 or later
Runtime version Ver.2.50.000 or later
Driver for connected device
Mitsubishi Electric Corporation
A Series CPU Direct (Protocol version: Version 1.12.01 or later)
FX Series CPU Direct (Protocol version: Version 1.12.05 or later)
Q Series CPU Direct (Protocol version: Version 1.10.02 or later)
QnA Series CPU Direct (Protocol version: Version 1.10.02 or later)
QUTE Series CPU Direct (Protocol version: Version 1.10.02 or later)
For CPU models compatible with each series, refer to the "GP-Pro EX Device/PLC Connection Manual".
Omron Corporation
CS/CJ series Host Link (Protocol Version: Version 1.12.02 or later)
-
To use Pass-Through Function, [SYSMAC WAY] needs to be specified for [Network Type] in the ladder software.
CS/CJ series Ethernet (Protocol Version: Version 1.12.03 or later)
-
If High Performance Unit is written by the Pass Through Function, response of Link Unit temporarily stops and an error may appear on the display unit.
-
To use Pass-Through Function, [SYSMAC WAY] needs to be specified for [Network Type] in the ladder software.
Keyence
KV-700/1000/3000/5000 CPU Direct (Protocol version: Version 1.13.02 or later)
-
During [Transfer to PLC] and [Read from PLC] on the Ladder Support Software, the communications with the Display may be temporarily interrupted.
Yokogawa Electric Corporation
Personal Computer Link SIO (Protocol version: Version 1.11.02 or later)
-
Pass-Through Function can be used only when the display is connected to the programming port on the CPU.
Personal Computer Link Ethernet (Protocol version: Version 1.11.02 or later)
Siemens AG
SIMANTIC S7 MPI Direct (Protocol Version: Version 1.13.03 or later)
Rockwell Automation, Inc.
DF1 (Protocol version: Version 1.12.06 or later)
Yaskawa Electric Corporation
MP Series SIO (Extension) (Protocol Version: Version 1.10.00 or later)
MP/Servo Ethernet (Protocol Version: Version 1.10.00 or later)
Panasonic Electric Works SUNX Co., Ltd.
FP Series Computer Link SIO (Protocol Version: Version 1.12.02 or later)
Toshiba Machine Co., Ltd.
TC Series (TCmini/TC200) (Protocol version: V1.13.03 or later)
Ladder Software
GX Developer - MELSEC PLC Programming Software by Mitsubishi Electric Corporation
-
Operating system
Windows 2000 - GX Developer Version 7 or later -
Window XP - GX Developer Version 8 or later
-
Windows Vista - GX Developer Version 8.58L or later
For details about the ladder software, refer to the manual of the connected device.
CX-Programmer - PLC Support Tool Software by OMRON Corporation
Version 3.0 or later
KV Studio, KV Builder - Ladder Support Software by KEYENCE Corporation
KV STUDIO: Version 1.17, Version 2.50, Version 4.14, Version 5.02
KV Builder: 1.13M, 2.02A, 4.70
WideField2 - FA-M3 program development tool by Yokogawa Electric Corporation
R3.01 or later
MPE720 - Engineering Work Station for the MP Series machine controller by Yaskawa Electric Corporation
Version 5.38 to Version 6.04 or later
Step7, STEP 7 Micro/WIN - Siemens AG programming tool
STEP7 Version 5.1 or later
STEP7 Micro/WIN Version 4.0.1.10 or later
RSLogix - Rockwell Automation, Inc programming tool
RSLogix500
RSLogix5000
Programming tool software "Control FPWIN GR" manufactured by Panasonic Electric Works SUNX Co., Ltd.
Control FPWIN GR Version 2.30 or later
Program software "TCPRGOS-W(J)" made by Toshiba Machine Co., Ltd.
TCPRGOS-W(J) Ver.2.27 or later
Cable
USB Transfer Cable
34.2 Transferring Project Files via USB Transfer Cable
Commercially-available LAN cable (Ethernet cable)