32.23.13.1 Calculating the Number of Steps When Setting Operands - HSC

Double-click the HSC instruction to display the following dialog box. In the following dialog box, specify each of the settings.

For details on the special I/O of the LT, refer to the following.
31.5 Controlling External I/O with LT

Setting	Operand	Description	Setting Range
CH	S1	Specify the channel number to which the high-speed counter is assigned. The high-speed counter for the channel number specified here is started.	CH1 - CH4
Synchronize Output	S2	Specify the mode for the high-speed counter (Synchronize Output On/Off). The value specified here is stored in the control part of #L_ExIOSPCtrl.	Constant 1 (Synchronize Output Off) or 3 (Synchronize Output On) Variable Integer variable only
D1: Instruction Status	D1	Specify the integer variable for storing the status of instruction execution.	Integer variable only

Setting

Operand

Description

Setting Range

Specify the channel number to which the high-speed counter is assigned.

The high-speed counter for the channel number specified here is started.

CH1 - CH4

Synchronize Output

Specify the mode for the high-speed counter (Synchronize Output On/Off). The value specified here is stored in the control part of #L_ExIOSPCtrl.

D1: Instruction Status

Specify the integer variable for storing the status of instruction execution.

Integer variable only