-
Some of the system variables used in logic programs work only when the logic program is enabled. Attention must be paid when [Disable] is selected for the logic program or you are using #L**** logic variables.
This is the system area of a display unit. You can use this area regardless of your device/PLC settings.
Some of the system variables used in logic programs work only when the logic program is enabled. Attention must be paid when [Disable] is selected for the logic program or you are using #L**** logic variables.
|
Name |
Type |
Example |
Description |
|---|---|---|---|
|
System Variable |
Bit |
#L_Clock100ms |
System Variable Bit Type of the display unit |
|
#L_Clock1sec |
|||
|
Integer |
#L_ScanTime |
System Variable Integer Type of the display unit |