产品
下载
联系我们
网站地图
返回首页

微信扫一扫
在线技术支持

微信扫一扫
访问视频号

 PS Series
> PS Series Type-G  > SNTP Client Module for PS-3600G  > How to Use the SNTP Client for PS-3600G
Note
1. It is prohibited to copy the contents of this document, in whole or in part, except for the user's personal use, without the permission of Digital Electronics Corporation of Japan.
2. The information in this document is subject to change without notice.
3. This document was written with care; however, if you should find any errors or omissions, please contact Digital Electronics Corporation and inform your findings.
4. Please be aware that Digital Electronics Corporation is not responsible for any damages resulting from the use of our products.
5. All product names that appear in this document are the trademarks of their companies.
 
SNTP(Simple Network Time Protocol)
It communicates regularly with the SNTP server on the network by using the SNTP client function, and the time of the system of PS-3600G can be synchronized.
 
Settings
The SNTP client is set with the control panel.
When the SNTP icon in the control panel is double-clicked, the SNTP properties dialog is open.
SNTP Properties Dialog
 
Description of Items
No. Item Description
1 Enable check box When checking it, the client function becomes effective, and it synchronizes regularly.
When the check is removed, the client function is invalidated, and it doesn't synchronize.
Other settings cannot be done when invalidating it.
2 Synchronize Now button It synchronizes with the server by the content being set now.
When the effective check box is removed, it is not possible to use it.
The preservation of the setting is necessary for being synchronous.
3 SNTP Server input box The synchronizing SNTP server name is input.
4 Add button The content input to the SNTP server input box is added to the list.
5 SNTP Server list There are lists of the servers that are set.
A synchronous connected priority level is the order after it lists of this.
6 Up button
Down button
The line that has been selected in the list of the server is moved up and down.
As a result, connected priority level of the server can be set.
7 Delete button Delete the line that has been selected in the list of the server.
8 Interval of Synchronizations The synchronizing interval with the server of time is specified.
The maximum value that can be set is 31 days 23 hours 59 minutes.
It is not possible to set to less than 5 minutes.

Last Updated: July 29, 2005
| Return to Top | | Back | HOME |
常见问题 | 个人信息保护 | 关于知识产权 | 使用条款
版权 (C) 2005- Schneider Electric Japan Holdings Ltd.,和普洛菲斯国际贸易(上海)有限公司版权所有,保留所有权利。
沪ICP备05028659号-3